TYLOS IMPLANT.
CERTIFICATION & COMPATIBILITY

ABOUT TYLOS

Tylos dental implant is part of TWIN DENTAL IMPLANTS made by Giesse Technology s.r.l.
It is full compatible with Dentsply Ankylos™. Implants are available in diameter (⌀) 3,5mm, 4,5mm; and 5.5mm with 8, 9.5, 11 and 14mm in titanium medical grade. It is packed with cover screw (HEX 1.0 mm) and millable mounter (HEX 2.2mm) indexed with slave screw included. Abutments are made in titanium medical grade.

COMPATIBILITY

Dentsply© Ankylos© full compatibility

Drills and tools compatibility

Tylos abutments and tools available

CERTIFICATION

The developped products, studies, tests, manufacturing and assistance to the customer are regulated and monitored by a certified Quality System according to ISO 9001-2008 and ISO 13485-2012 for medical components by TÜV Rheinland and are entirely made in GIESSE TECHNOLOGY without the presence of external suppliers except for the sterilization process.
CE
CE1
CE3
GIESSE TECHNOLOGY has the CE marking in accordance with Directive 93/42/CEE. Quality Control performs visual inspections and dimensional on 100% of the implants, abutments and tools. In addition to the random dimensional checks on the products, are made stress and fatigue checks. GIESSE TECHNOLOGY is partner of university studies and projects as scientific experimentation with an important role for the company. Everything is aimed at the full satisfaction of the customer.
CE3
PRODUCTS OVERVIEW

TYLOS IMPLANT SYSTEM

Click tabs for info and images to follow Medikont Group Order store.

Giesse

Ø 3,5 , Lenght: 8-9,5-11-14mm

Giesse

Ø 4,5 , Lenght: 8-9,5-11-14mm

Giesse

Ø 5,5 , Lenght: 8-9,5-11-14mm

Giesse

Indexed (not-rotating), h: 6,6mm, Ø:5,6mm, GH: 1,5-3,0-4,5mm

Giesse

Non-indexed (rotating), h: 6,6mm, Ø:5,6mm, GH: 1,5-3,0-4,5mm

Giesse

Angled (15° - 22,5°), Indexed (not-rotating), h: 7mm, Ø:5,6mm, GH: 1,5-3,0-4,5mm

Giesse

Angled (15° - 22,5°) Non-indexed (rotating), h: 7mm, Ø:5,6mm, GH: 1,5-3,0-4,5mm

Giesse

One - piece abutment, Non-index (rotating), h: 4,0mm, Ø:3,3mm, GH: 0,75-1,5-3,0-4,5-6,0mm

Giesse

One - piece abutment, Non-index (rotating), h: 6,0mm, Ø:3,3mm, GH: 1,5-3,0-4,5mm/span>

Giesse

One - piece abutment, Non-index (rotating), h: 4,0mm, Ø:4,5mm, GH: 1,5-3,0mm/span>

Giesse

One - piece abutment, Non-index (rotating), h: 6,0mm, Ø:4,5mm, GH: 0,75-1,5-3,0mm/span>

Giesse

Angled abutment, Non-index (rotating), h: 4,0mm, Ø:3,3mm, GH: 1,5-3,0mm

Giesse

Angled abutment, Non-index (rotating), h: 6,0mm, Ø:3,3mm, GH: 1,5-3,0mm

Giesse

Angled abutment, Non-index (rotating), h: 4,0mm, Ø:4,5mm, GH: 1,5-3,0mm

Giesse

Angled abutment, Non-index (rotating), h: 6,0mm, Ø:4,5mm, GH: 1,5-3,0mm

Giesse

Ø 3,3mm , GH: 1,5-3,0-4,5-6,0mm

Giesse

Ø 4,5mm , GH: 1,5-3,0

Giesse

Ø 5,6mm , GH: 1,5-3,0-4,5

Giesse

Implant lab analog Ø 3,5 - 4,5 - 5,5

Giesse

Transfer balance, small - big

Giesse

Transfer Regular, Indexed (not rotating),h: 8-13mm

Implants and abutments are full compatible with Ankylos© tools and other compatible implant and abutment tools. Please check Tylos tools:
Giesse

Ratchet wrench with torque

Giesse

Ratchet wrench

Giesse

EX 2,2 mm mounter TYLOS H10

Giesse

EX 2,2 mm mounter TYLOS H15

Giesse

EX 1,0 mm per TYLOS H10

Giesse

EX 1,0 mm per TYLOS H15

Giesse

Ratchet connection - Standard Abutment Ø3,3mm

Giesse

Ratchet connection - Standard Abutment Ø4,5mm

Giesse

Handpiece driver hex 2.2mm mounter TYLOS H10

Giesse

Handpiece driver hex 2.2mm mounter TYLOS H15

Giesse

Driver hex 1.0mm mounter TYLOS H10

Giesse

Driver hex 1.0mm mounter TYLOS H15

GIESSE TWIN implants packaging is made with a titanium medical grade mounter abutment and retaining screw or placed in a metal basket depending on the lines. The plastic materials (phthalate-free and free substances of animal origin free) used in the realization of the container, the tap and the blister are in accordance with regulations and it is ideal for beta rays sterilization, preventing the alteration of the product after years. Dental implant decontamination and packaging processes are performed in a controlled cleaning room, and it guarantees safe conditions of particle and microbiological contamination. The cleaning room class has been determined to ensure constant and low productsterilization bioburden to confirm sterilization, which is guaranteed for 5 years.
Giesse
Giesse
Giesse
Giesse
RESEARCH
GIESSE HSS implant has been analyzed for biological tests of cellular proliferation. The control sample was the typical environment in which this type of cells are maintained in culture. Cellular proliferation on the HSS implant surface is extremely increased in the first nine days of application of the cells, compared to an equal implant only sandblasted. After the ninth day of growth trends are similar. It is very important the cell proliferation of the HSS implants is comparable to the cellular proliferation present on the control. Below you can see some images obtained using the epifluorescence microscope. The cells show a typical morphology of fibroblasts derived from human osteosarcoma (MG-63). From theese images it is clearly visible a very high level of adhesion to the substrate and the presence of filopodia, organized on multiple layers and a massive amount of extracellular matrix.
Implant surface 500x

Implant surface 500x

Implant surface 1000x

Implant surface 1000x

Implant surface 1500x

Implant surface 1500x

Implant surface 1500x

Implant surface 1500x

GIESSE dental implant surfaces were analyzed in partnership with the University of Trieste. The results obtained using a scanning electron microscope (SEM) show the surface roughness in open porosity, obtained by the new process HSS (High Speed Surface), consequence of the application of a sand-blasting treatment and an acid action, is highly compatible with osseointegration process of this type of dental implant.
Implant surface 500x

Implant surface 500x

Implant surface 1000x

Implant surface 1000x

Implant surface 1500x

Implant surface 1500x

In CERMET labs a fatigue test on TWIN dental implants was performed in order to determine the resistance to dynamic stress, which ensures an infinite life of the implant system (fixed at 5,000,000 cycles). The regulation that was applied is UNI EN ISO 14801-2008: "Dentistry - equipment - dynamic fatigue test for intraosseous dental implants". It is expected that the load to be applied in dynamic fatigue test is obtained by a static test made with the same pattern of loading; GIESSE TECHNOLOGY dental implants have passed the test and the designed components showed no structural defects and/or permanent deformation on the surface. Image description: Gripping for the fatigue test
Fatigue
Fatigue
Fatigue
The HSS treatment positively affects also on the implant surface wettability. Below you can see the increased wettability of the HSS implant, compared to only one sandblasted. Image description: Wettability comparison between HSS implant and sandblasted implant
Wettability

HSS implant

Wettability

Sandblasted implant

As regards the fitting fixture-abutment, hexagonal conical connection was tested, because this one is the most complicated to realize. Radiographs, three-dimensional reconstructions and tomography present a high quality fit, with few and very small spaces between abutment, implant collar and screw connection, not sufficient to ensure penetration of bacterial agents.
Fitting

Three-dimensional rendering of the abutment-fixture coupling

Fitting

Three-dimensional rendering of the abutment-fixture coupling

Fitting

RX abutment-fixture fitting

CLINICAL GUIDELINES
Implant surface 500x

Package with Ø 4,5 x 11mm implant, cover screw (HEX 1.0 mm) and millable mounter (HEX 2.2mm)

Implant surface 1500x

Millable mounter (HEX 2.2mm) from top of the package

Implant surface 1000x

Ø 4,5 x 11mm implant with mounter (HEX 2.2mm)

Implant surface 1500x

Driver HEX 2.2mm for mounter holding mounter and Ø 4,5 x 11mm implant

Implant surface 500x

Driver HEX 1,0mm unmounting mounter from Ø 4,5 x 11 mm

Implant surface 1000x

Driver HEX 1.0mm unmounting cover screw from package cover

Implant surface 1500x

Driver HEX 1.0mm holding standard healing abutment Ø4,5mm GH:1.5mm

Implant surface 1500x

Standard healing abutment Ø4,5mm GH:1.5mm with Ø 4,5 x 11 mm implant

Implant surface 500x

Driver HEX 1,0mm holding standard abutment 22.5° Ø3.3 h:4mm GH:3mm

Implant surface 1000x

Standard abutment 22.5° Ø3.3 h:4mm GH:3mm with Ø 4,5 x 11 mm implant

Description Torque
Implant max 50 Ncm
Closing screw 6 Ncm
Healing abutment 15 Ncm
Regular abutment indexed or not indexed 15 Ncm
Standard straight abutment 25 Ncm
Standard angled abutment 15 Ncm
×

TYLOS GROUP ORDER

You can order Tylos and other implant systems at Medikont Group Order Community, where health professionals gather their individual orders and purchase products directly at manufacturer. Medikont is a trade, communication and organization center for doctors. It was established by doctors who, beside exercising their regular medical work, also manage clinics and other medical institutions.
Group Order Medikont
info@medikont.com

Use of trademarks

Registered trademarks are owned by their respective companies and there is no commercial relationship with Medikont Health professional's community. Its mention is made for proper identification purpose of the dental implant with which the products on Medikont website can be used. Please refer to legal terms and conditions on Medikont.si page.
ANKYLOS® is registered trademarks of DENTSPLY™ Implants

All mentioned trademarks belong to their owners; third-party brands, product names, trade names, corporate names and company names may be trademarks of their respective owners or registered trademarks of other companies and have been used for explicative purposes of explanation without implying a violation of copyright law.